Square Cutter for Polymer Clay, Jewelry Making #560

These cutters are 3D printed by us at time of order.

In this case the measurements are by the straight line from top to bottom or side to side of imprint/inside of the cutter.


Sets are coming in 9 options:

Small - 5 cutters: 0.5". 0.75", 1", 1.25", 1.5".

Small - 4 cutters: 0.5". 0.75", 1", 1.25".

Small - 4 cutters: 0.75", 1", 1.25", 1.5".

Small - 3 cutters: 0.5". 0.75", 1".

Medium- 3 cutters : 1.75" , 2", 2.25".

Large- 3 cutters : 2.5", 2.75" , 3" .

Set of 11 cutters 0.5" - 3".

X-Large - 4 cutters : 3.5", 4", 4.5", 5".

All set 15 cutters 0.5" - 5".



The cutter is made of PLA plastic, food safe.
PLA is a biodegradable plastic.

Please hand wash your cutter. The high heat of a dishwasher might warp the plastic.

If there is a support bar across the cutter shape it will not be seen in the imprint of the final shape made with this cutter.
Also, it would be best not to use the cutter on hot dough, as doing so may cause it to split /fall apart.

The color of the cutter may vary, It will depend on which color we have in our printer at the time of your order.

All cutters have hard profile edge with optimal shape. They are thinner at edge but not sharp/dangerous-

The height of the cutter is 12 mm.


Your cutter may come with a slight deviation in measurements.

If you need a custom height/size please let us know before you buy to make a custom order for you.