Christmas Cutters Bundle 20Pcs + Micro 0.4in Bonus for Mini Stud Dangling Earrings Polymer Clay, Jewelry Mini Stud Making #746

Christmas Cutters Bundle 20Pcs + 0.4in Bonus are here.

These cutters are 3D printed by us at time of order.

These cutters are also available for individual purchase on our store website!

The embossing sections work best on slabs 3-3.5mm thick.

When you order a regular you won't get the mirror. When you order the mirror, you won't get the regular. only if you buy BOTH - you will get regular and mirror of same shape!

In order to get a clean cut:
1. Make sure the polymer clay is put on a DRY surface! Before you cut...
2.Try use wet cloth or baby wipes to clean cutter before cutting pushing then into clay using some vibration at end. Then wipe it again. That way it is a clean cut with clean cutters!
3. Another option is to use clinging nylon in between cutter-embosser and clay.

The cutter is made of PLA plastic, food safe.
PLA is a biodegradable plastic.

Please hand wash your cutter. The high heat of a dishwasher might warp the plastic.

If there is a support bar across the cutter shape it will not be seen in the imprint of the final shape made with this cutter.
Also, it would be best not to use the cutter on hot dough, as doing so may cause it to split /fall apart.

The color of the cutter may vary, It will depend on which color we have in our printer at the time of your order.

All cutters have hard profile edge with optimal shape. They are thinner at edge but not sharp/dangerous-

The height of the cutter is 12 mm.

The measurements are by the longest cutting imprint/inside of the cutter.


⚠️ WARNING CHOKING HAZARD
This is not a toy. Not suitable for children of any age.

Your cutter may come with a slight deviation in measurements.


If you need a custom height/size, please let us know before you buy to make a custom order for you.

Christmas Cutters Bundle 20Pcs + 0.4in Bonus are here.