Ribbon Bow Cutters for Christmas Cookie or Fondant & Polymer Clay, Jewelry Earrings Stud Making #736

Ribbon Bow Cutters for Christmas are here!
These cutters are 3D printed by us at time of order.

The measurements are by the longest length or width cutting imprint/inside of the cutter.


The embossing sections work best on slabs 3-3.5mm thick.

In order to get a clean cut:
1. Make sure the polymer clay is put on a DRY surface! Before you cut...
2.Try use wet cloth or baby wipes to clean cutter before cutting pushing then into clay using some vibration at end. Then wipe it again. That way it is a clean cut with clean cutters!
3. Another option is to use clinging nylon in between cutter-embosser and clay.

The cutter is made of PLA plastic, food safe.
PLA is a biodegradable plastic.

Please hand wash your cutter. The high heat of a dishwasher might warp the plastic.

If there is a support bar across the cutter shape it will not be seen in the imprint of the final shape made with this cutter.
Also, it would be best not to use the cutter on hot dough, as doing so may cause it to split /fall apart.

The color of the cutter may vary, It will depend on which color we have in our printer at the time of your order.

All cutters have hard profile edge with optimal shape. They are thinner at edge but not sharp/dangerous-

The height of the cutter is 12 mm.




⚠️ WARNING CHOKING HAZARD
This is not a toy. Not suitable for children of any age.

Your cutter may come with a slight deviation in measurements.


If you need a custom height/size please let us know before you buy to make a custom order for you.
Ribbon Bow Cutters for Christmas are here!