Spider Web Halloween Stamps for Polymer Clay Jewelry Earrings Making or Soap #1113

Halloween Stamps Cutters are here!

These Embosser Stamps are 3D printed by us at time of order.




The measurements are for actual stamping area.
Please allow slight measurements deviations.

In order to get a clean embossing:
1. Make sure the polymer clay is put on a DRY surface! Before you stamp on it...
2. Try use wet cloth or baby wipes to clean stamp before embossing pushing then into clay. Press the stamp gently firmly and evenly. In order to avoid breaking the stamp, don't press too hard and don't apply sideways pressure.
There are parts of the stamp that designed to be thin in order to obtain a defined embossing.
3. Then wipe it again. That way it is a clean embossing with clean stamps!


These stamps do not have a handle, so they need to be lifted from the clay/soap from the edges.
However, you can purchase a handle at the time of purchase.
If you order than it will come glued to the embosser.
In rare cases that they depart just glue again.


These stamps are made for polymer clay. They also work well with pottery and soap making.

The stamp is made of PLA plastic, food safe.
PLA is a biodegradable plastic.

Please hand wash your stamp. The high heat of a dishwasher might warp the plastic.

If there is a support bar across the cutter shape it will not be seen in the imprint of the final shape made with this cutter.
Also, it would be best not to use the stamp on hot dough, as doing so may cause it to split /fall apart.

The color of the stamp may vary, It will depend on which color we have in our printer at the time of your order.



⚠️ WARNING CHOKING HAZARD
This is not a toy. Not suitable for children of any age.

Your stamp may come with a slight deviation in measurements.


If you need a custom height/size, please let us know before you buy to make a custom order for you.
Halloween Stamps Cutters are here!